Lifebreath TechGrille Stack Head Elbow – 4″

Lifebreath Stack Head Elbow

Lifebreath TechGrille Stack Head Elbow – 4″

  • Manufacturer: Airia Brands
  • Description: Lifebreath TechGrille Stack Head Elbow – 4″
  • Compatibility: Any Air Exchanger
  • Manufacturers’ Part Number:  99-WF4

Purchase Includes Unlimited Technical Support.

Canada-Wide shipping  ( 1-5 day delivery on most orders )

(see shipping estimates in shopping cart)

Ships in : 2 – 5 Days

Our Order Number: AE-963

 

Price: $4.75

In stock

Quantity:
SKU: AE-963 Categories: , Tag:

 Lifebreath TechGrille  Stack Head Elbow –  4″

• Adapts to 4 in./6 in. Tech Grille
• Fits neatly in 2 in. x 4 in. & 2 in. x 6 in. walls
• Quick rough-in and easy to secure

99-WF4 = 4 inch plastic elbow
99-WF6 = 6 inch plastic elbow

 

 

 

AIR EXCHANGER NEW INSTALLATION    $598.00

(Greater Toronto Area) 

GasExperts™  Air Exchanger Retrofit Installation Service Notes:
  • Two 6″ holes will be cut to your home’s exterior wall for the new weatherhoods.
  • Installation Method = “Simplified” (furnace return duct method).
  • Installation fee includes proper furnace / HRV interlock setup.
  • Typical installations will include two certified HVAC technicians.
  • Installation fee includes proper airflow adjustments & accurate air balancing.
  • Main or Auxiliary control wiring to upper level may incur additional fee’s.
  • Upon Completion of install, full maintenance & operating instructions provided.
  • Installation includes a 30-Day Money-Back Satisfaction Guarantee.
 ACCESSORIES FEE: $165.00
  • Accessories fee includes properly sized ducting for the recommended air flows.
  • Accessories fee includes up to 25 feet of insulated duct.
  • Accessories fee includes up to 25 feet of non-insulated duct.
  • Accessories fee includes two fixed covered intake & exhaust hoods with mesh

AIR EXCHANGER REPLACEMENT SERVICE    $348.00

(Greater Toronto Area) 

  • Typical installations will include one certified HVAC technician.
  • Installation fee includes proper airflow adjustments & accurate air balancing.
  • Accessories fee (if any)  to be determined upon arrival.
  • Wall or Auxiliary control wiring to upper level may incur additional fee’s.
  • Upon Completion of install, full maintenance & operating instructions provided

AIR EXCHANGER MAINTENANCE VISIT  $96.00

(Greater Toronto Area)

We have you covered with our 13-Point comprehensive maintenance package:
  • Remove and clean filters. Vacuum / wash or replace* worn out filters as necessary.
  • Remove and clean heat core. Vacuum / wash as necessary.
  • Clean interior housing and motor fan blades. Vacuum and wipe clean as necessary.
  • Clean the drain line, flush if necessary. Ensure drain trap is properly working. Replacement of broken fittings or blocked drain lines*
  • Inspect and clean all interior grilles.
  • Inspect and clean exterior weather hoods. Replacement of broken / missing screens. Re-caulk / seal with foam where necessary. replacement of damaged or inferior exterior hoods as necessary*
  • Check defrost damper and cold air sensor. Confirm the damper opens, closes and seals properly.
  • Inspect insulated flexible duct and reseal where necessary. If insulated duct is wet and soggy, replacement will be advised*
  • Inspect non-insulated duct and seal with foil tape where necessary.
  • Ensure furnace interlock is working properly. Re-wire if necessary.
  • Ensure if installed that the spring-loaded back draft damper is operating properly. (typically located on the “stale air to outside collar”).  Install new damper if required*
  • Check wall control to ensure proper operation of HRV.
  • Most importantly, measure and properly balance HRV air flows as required by specific HRV manufacturer.
*denotes additional cost applicable.